![]() |
#436 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 78
Karma: 25542
Join Date: Nov 2013
Location: NRW Germany
Device: Kobo Forma
|
@jackie_w
Here my minclock.cfg Used with the latest version from #311! These issue is only with my Kobo Aura, also after a FacoryReset! With my Forma, all works fine, after a FactoryReset! Last edited by jamalau; 06-04-2020 at 10:54 AM. |
![]() |
![]() |
![]() |
#437 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
As @jackie_w said, I can't reproduce the Invert issue on a H2O, FWIW.
But, lightbulb moment: @jamalau: You're running in *overlay* mode. This requires hardware nightmode support to behave properly. I disabled hardware nightmode support on the Aura because it's known to crash on older FW versions. So, on an Aura, that won't work, ever. (This applies to backgroundless mode, too, FWIW). The Aura is the only device to suffer from this quirk. (But other old devices may have *broken* nightmode support on older FW, too). |
![]() |
![]() |
Advert | |
|
![]() |
#438 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 6,212
Karma: 16534894
Join Date: Sep 2009
Location: UK
Device: Kobo: KA1, ClaraHD, Forma, Libra2, Clara2E. PocketBook: TouchHD3
|
Quote:
re: old Kobo Aura 6" Just to confirm that with the following settings MiniClock and InvertScreen via NickelMenu are working happily together when InvertScreen is toggled: Code:
backgroundless=0 overlay=0 |
|
![]() |
![]() |
![]() |
#439 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
That said, the behavior on the Aura is specific to the hardware: whether the Invert feature is enabled via NickelMenu or via the Dev menu shouldn't change anything.
(What *would* behave differently is the standalone nightmode hack in software inversion mode. But we're starting to reach the edge-case inside a corner-case at that point ^^). |
![]() |
![]() |
![]() |
#440 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 483
Karma: 5277078
Join Date: Oct 2009
Location: UK
Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)
|
Below is my cfg file on my Clara HD. No matter what combination of backgroundless and overlay I use, invert screen is not recognised if I directly select it using NickelMenu. It works perfectly otherwise.
Please correct whatever I have set incorrectly within the config. Thanks, |
![]() |
![]() |
Advert | |
|
![]() |
#441 |
Member
![]() Posts: 21
Karma: 10
Join Date: Aug 2015
Location: Vienna
Device: Kobo Aura HD Mark 4
|
I have an Issue with my Kobo Aura HD new Firmware not showing Battery Status.
What should I put in the cfg File to show me my Battery Status all the Time ? No need to bother, I figured it out ![]() Last edited by bansheeat; 06-05-2020 at 01:20 PM. |
![]() |
![]() |
![]() |
#442 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 6,212
Karma: 16534894
Join Date: Sep 2009
Location: UK
Device: Kobo: KA1, ClaraHD, Forma, Libra2, Clara2E. PocketBook: TouchHD3
|
Quote:
So, what else to try???
|
|
![]() |
![]() |
![]() |
#443 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Hmm, @jackie_w might be on to something with 2. (and/or 1., as I don't have the patch enabled on my end), multiple entries of the same name in the config file might very well be confusing things.
Not quite sure why that'd only happen via NickelMenu, though, because that updates the config instantaneously on my end... @church mouse: Probably harmless, but your config is based on an old template, there are a few missing keys in it. They *should* automatically default to sane values, but it couldn't hurt to rebuild a config out of the latest example one. @bansheeat: Tweak the battery_min/battery_max range? Last edited by NiLuJe; 06-05-2020 at 11:44 AM. |
![]() |
![]() |
![]() |
#444 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 483
Karma: 5277078
Join Date: Oct 2009
Location: UK
Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)
|
@jackie_w
Thank you for the feedback. The answer for point 2 is "no". On point 3, I have not manually edited the conf file. That just leaves point 1 - I definitely have not disabled the kobopatch toggle because I was not aware that the patch and NickelMenu could cause a conflict. Is that a respectable guess or a definite? I ask because I seek to reduce firmware installations as much as possible. |
![]() |
![]() |
![]() |
#445 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
I can only say I don't have it enabled on my end, and it works
![]() |
![]() |
![]() |
![]() |
#446 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 483
Karma: 5277078
Join Date: Oct 2009
Location: UK
Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)
|
@NiLuJe
I will grab a newer version of the cfg template and see if that fixes things. |
![]() |
![]() |
![]() |
#447 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 483
Karma: 5277078
Join Date: Oct 2009
Location: UK
Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)
|
|
![]() |
![]() |
![]() |
#448 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,492
Karma: 26047188
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Do remember that a patch (re)-install isn't a full firmware update, it'll only update 2 or 3 files, if you were worried about write cycles (which you shouldn't, really).
|
![]() |
![]() |
![]() |
#449 | |
Grand Sorcerer
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 6,212
Karma: 16534894
Join Date: Sep 2009
Location: UK
Device: Kobo: KA1, ClaraHD, Forma, Libra2, Clara2E. PocketBook: TouchHD3
|
Quote:
![]() Before I installed NickelMenu I anticipated having both the patch and NickelMenu trying to do the same thing may cause problems, so I didn't give them the chance. My ClaraHD works as intended with your miniclock.cfg. The old patch is disabled and my .conf file has one entry for InvertScreen and it's in the [FeatureSettings] section. |
|
![]() |
![]() |
![]() |
#450 |
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 483
Karma: 5277078
Join Date: Oct 2009
Location: UK
Device: Kobo Clara HD, Boox Poke 2, PocketBook Verse Pro (634)
|
Double bother!
I have changed the cfg template and repatched without the Adobe Page Number patch enabled, but I still get a white background on selecting invert from NickelMenu. |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
I (almost) spend more time reading about e-readers than e-reading | Antoinekamel | General Discussions | 15 | 02-25-2013 10:48 AM |
360 PB360 display gets "stripes" from time to time | klaetsch | PocketBook | 1 | 01-05-2011 04:49 AM |
How to get the time to display | synic | Sony Reader | 9 | 06-10-2009 06:05 PM |
Time Display | Jenny123 | Sony Reader | 2 | 04-23-2009 02:06 PM |
Time Display? | MickeyC | Sony Reader | 3 | 02-10-2008 11:57 PM |