Direct Links to Kobo Firmware - Page 19

KoboJasi · 03-12-2013, 10:41 AM

Fine. So, I need to find someone who has an image of a same kind of Touch's card, and edit the serial number, then write the image to my card, and thats it. Thanks for all of you, I'm on it!

GeorgK · 03-12-2013, 10:53 AM

Quote:

Originally Posted by DNSB

There is no older firmware that will work on the new and old Touch hardware. ...

How do I decide one from the other?

Georg

KoboJasi · 03-12-2013, 11:05 AM

One more thing I just thought: the firmware of the "new" touch is the same as the fw of a Glo, or I misread something? If these are equal, Kevin, would you share your card image with me, please?

KevinShort · 03-12-2013, 11:29 AM

Quote:

Originally Posted by KoboJasi

One more thing I just thought: the firmware of the "new" touch is the same as the fw of a Glo, or I misread something? If these are equal, Kevin, would you share your card image with me, please?

It's worth a shot. I've sent you a private message with the link.

KoboJasi · 03-12-2013, 02:55 PM

Hey Kevin, it's almost done!

Though your image doesn't fit for my Touch, I have seen the signs of life on the screen after a long-long week, so I'm getting optimistic.
Otherwise, the Kobo starts up (the center of the screen a little bit slided to the bottom-left corner), I could select language, but nothing then.
So I must find the correct image, then it will work again, I'm sure.

A big

for you!

KevinShort · 03-12-2013, 03:35 PM

Fantastic! I'm glad to hear it.

DNSB · 03-12-2013, 03:48 PM

Quote:

Originally Posted by GeorgK

How do I decide one from the other?

Georg

Check earlier in this thread for the full message. Basically, I did a factory reset and then looked at the size of the .tgz file that was loaded to the .kobo directory on my Kobo before I disconnected it. My suspicion is that Kobo uses the serial number to decide which firmware version to download but no real evidence to support that belief.

Regards,
David

GeorgK · 03-13-2013, 05:33 AM

Quote:

Originally Posted by DNSB

...My suspicion is that Kobo uses the serial number to decide which firmware version to download ...

Obviously I couldn't make myself understood

I want to sideload a new firmware to my KObo Touch and want to make sure I use the right file.
There are two of them: a file for "new" hardware and one for "old" hardware.
Unfortunately I cannot say if I've got an old or a new Kobo. How can I check which version of KObo Touch I purchased?

Regards
Georg

KoboJasi · 03-13-2013, 08:59 AM

Hi George!
Here are some tips for you:
1. The new version of Touch appeared first at last spring. Check the box of your device, I think if you find a date under the barcode you can decide it - but I'm not absolutely sure.
2. If you feel comfortable to open up your device, do it, and check if you find an internal microSD card on board. The older hardwares doesn't contain it, just the newer ones.
3. This is the most important: if you can find a microSD in it, TAKE A BACKUP OF IT!! BEFORE YOU TRY TO SIDELOAD ANY FIRMWARE! I mean take an image file of the whole card, so that in the future you can revive your Kobo relatively easily if you brick it...
There are several of us in this forum who has bricked their reader by sideloading a firmware on it.. Check this thread: https://www.mobileread.com/forums/sho...d.php?t=201132

tshering · 03-13-2013, 09:48 AM

Quote:

Originally Posted by GeorgK

Obviously I couldn't make myself understood

I want to sideload a new firmware to my KObo Touch and want to make sure I use the right file.
There are two of them: a file for "new" hardware and one for "old" hardware.
Unfortunately I cannot say if I've got an old or a new Kobo. How can I check which version of KObo Touch I purchased?

Regards
Georg

GeorgK,

DNSB suggested you could force the device to download the correct firmware (without installing it), and then compare the downloaded file with those files you can download directly via the links in the first post.
In order to force the device to download the FW, you could factory reset the device. There are certainly also possibilities to trick the device into updating, maybe changing an entry in the database or a config file. I did not look into that.

I tried to come up with another method.
1) First ascertain the rev number (settings>device information). In my case it is 84fbb7111a, this means FW 2.4.0, first release.
2) Download the two update files of that release, one for the old and one for the new hardware, to your pc
3) Decompress these files and try to establish a difference. There are several differences. I settled on the differences in the folder "KoboRoot\drivers\ntx508\usb\gadget". This folder contains three files. Each of them differs in size when compared to the other version.
4) So we only have to find which of those files are on our device. We can do this by executing a bash script.

Code:

#!/bin/sh
ls -lc /drivers/ntx508/usb/gadget > /mnt/onboard/log_listgadget.log

5) We open the log_listgadget.log and compare the file size information with those we saw in the downloaded update files.

Edit: There are several ways to run a bash script on the device. One of them is to use the KoboLauncher for standalone Qt apps (link).

tshering · 03-13-2013, 12:34 PM

Quote:

Originally Posted by KoboJasi

2. If you feel comfortable to open up your device, do it, and check if you find an internal microSD card on board. The older hardwares doesn't contain it, just the newer ones.

There are Touch models with older hardware and removable internal microSD cards.

Mrs_Often · 03-14-2013, 05:26 AM

Quote:

Originally Posted by KoboJasi

Hey Kevin, it's almost done!

Though your image doesn't fit for my Touch, I have seen the signs of life on the screen after a long-long week, so I'm getting optimistic.
Otherwise, the Kobo starts up (the center of the screen a little bit slided to the bottom-left corner), I could select language, but nothing then.
So I must find the correct image, then it will work again, I'm sure.

A big

for you!

Yay I'm so happy for you!

So what image is it exactly that you're looking for? The NEW Touch or the OLD Touch? I'm assuming the NEW Touch (in which case I can't help you, sorry).

Mrs_Often · 03-14-2013, 05:28 AM

Quote:

Originally Posted by GeorgK

Obviously I couldn't make myself understood

I want to sideload a new firmware to my KObo Touch and want to make sure I use the right file.
There are two of them: a file for "new" hardware and one for "old" hardware.
Unfortunately I cannot say if I've got an old or a new Kobo. How can I check which version of KObo Touch I purchased?

Regards
Georg

Have a look here: https://www.mobileread.com/forums/sho...d.php?t=206071

It's not 100% proven to be correct, so use at your own risk...

GeorgK · 03-14-2013, 05:59 AM

Quote:

Originally Posted by Mrs_Often

...It's not 100% proven to be correct, so use at your own risk...

If I studied that thread correctly, my Touch (SN: KG319...) most likely is an old one. Thanx

Georg

Mrs_Often · 03-14-2013, 08:10 AM

Quote:

Originally Posted by GeorgK

If I studied that thread correctly, my Touch (SN: KG319...) most likely is an old one. Thanx

Georg

I think so too!

Make sure to get a backup before trying anything

03-12-2013, 10:41 AM	#271
KoboJasi Junior Member Posts: 9 Karma: 5780 Join Date: Mar 2013 Device: Kobo Touch	Fine. So, I need to find someone who has an image of a same kind of Touch's card, and edit the serial number, then write the image to my card, and thats it. Thanks for all of you, I'm on it! Last edited by KoboJasi; 03-12-2013 at 10:55 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SD card firmware (1.4) image links for AU/NZ	sabredog	Kobo Reader	42	03-27-2015 04:11 AM
Kobo Writing Life now open (New direct self-pub program)	MMHaven	Writers' Corner	12	08-08-2012 11:25 AM
Firmware Links	Montebello	Andere Lesegeräte	0	12-20-2009 04:58 PM
Updating firmware without direct Internet connection	KillerRabbit	iRex	1	01-08-2007 12:08 PM

03-12-2013, 11:05 AM	#273
KoboJasi Junior Member Posts: 9 Karma: 5780 Join Date: Mar 2013 Device: Kobo Touch	One more thing I just thought: the firmware of the "new" touch is the same as the fw of a Glo, or I misread something? If these are equal, Kevin, would you share your card image with me, please?

03-12-2013, 02:55 PM	#275
KoboJasi Junior Member Posts: 9 Karma: 5780 Join Date: Mar 2013 Device: Kobo Touch	Hey Kevin, it's almost done! Though your image doesn't fit for my Touch, I have seen the signs of life on the screen after a long-long week, so I'm getting optimistic. Otherwise, the Kobo starts up (the center of the screen a little bit slided to the bottom-left corner), I could select language, but nothing then. So I must find the correct image, then it will work again, I'm sure. A big for you!

03-12-2013, 03:35 PM	#276
KevinShort Addict Posts: 348 Karma: 209937 Join Date: Jan 2012 Location: Virginia, US Device: Kobo Wifi, Kobo Glo	Fantastic! I'm glad to hear it.

03-13-2013, 08:59 AM	#279
KoboJasi Junior Member Posts: 9 Karma: 5780 Join Date: Mar 2013 Device: Kobo Touch	Hi George! Here are some tips for you: 1. The new version of Touch appeared first at last spring. Check the box of your device, I think if you find a date under the barcode you can decide it - but I'm not absolutely sure. 2. If you feel comfortable to open up your device, do it, and check if you find an internal microSD card on board. The older hardwares doesn't contain it, just the newer ones. 3. This is the most important: if you can find a microSD in it, TAKE A BACKUP OF IT!! BEFORE YOU TRY TO SIDELOAD ANY FIRMWARE! I mean take an image file of the whole card, so that in the future you can revive your Kobo relatively easily if you brick it... There are several of us in this forum who has bricked their reader by sideloading a firmware on it.. Check this thread: https://www.mobileread.com/forums/sho...d.php?t=201132

Advert

Advert