12-20-2010, 05:28 AM | #136 |
Junior Member
Posts: 8
Karma: 10
Join Date: Mar 2010
Device: Irex DR800sg
|
Thanks to all who put in the effort to get this all working. Great improvements.
I had problems because windows left a '.bin' at the end of the 'out' file when i renamed it to uds.dr1000, and it was a hidden 'known' file type. When i removed the .bin suffix, worked perfect. Thanks, gat |
01-11-2011, 06:37 AM | #137 |
Junior Member
Posts: 5
Karma: 10
Join Date: Jan 2011
Device: irex 800
|
dr1000-0629 is missing on the irex site
Hello,
I wanted to try your update. I tried to download the dr1000 file you recommend, but it is not there. Can you tell me which file is the right one? On that website I see installation_notes-dr1000.txt 08-Sep-2010 10:25 update-dr1000s-beta.zip 30-Jun-2010 11:03 update-dr1000s-beta2.zip 30-Jun-2010 11:03 update-dr1000s-rc1.zip 30-Jun-2010 10:46 update-dr1000s-rc2.zip 30-Jun-2010 10:46 update-dr1000s-rc3.zip 30-Jun-2010 10:27 user_manual-dr1000s-en.zip 10-Jun-2010 14:10 which is the right one? Thanks |
Advert | |
|
01-11-2011, 11:30 AM | #138 |
Groupie
Posts: 175
Karma: 863
Join Date: Oct 2009
Location: Germany, Karlsruhe
Device: Iliad v2, DR800S (inlove)
|
update-dr1000s-rc3.zip 30-Jun-2010 10:27 please.
|
01-13-2011, 09:44 AM | #139 |
Junior Member
Posts: 5
Karma: 10
Join Date: Jan 2011
Device: irex 800
|
Hello,
I would just like to thank the developers for this upgrade! it is excellent. I followed the instructions and everything works. I especially like the tabs on the side for multiple documents as well as the "jump to previous" for pdf docs (I like to jump around a lot in pdfs, cumbersome on these things - until now!). I read the dr1000 manual (since a lot of these features are there) and I had two questions. 1) Is there a way to put a "jump to previous" shortcut at the bottom of the page with the other shortcuts? 2) is there a way to change the document I am viewing (i.e. change tabs) without the stylus? Thanks again! |
01-13-2011, 01:50 PM | #140 | |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
Quote:
1) We'd need to change the current code. As DR800 is smaller than DR1000 there is no much horizontal place to put more icons, so we'd need to remove another... I think the current icons are the more useful ones 2) no Iņigo |
|
Advert | |
|
02-15-2011, 05:45 AM | #141 |
Enthusiast
Posts: 43
Karma: 1000010
Join Date: Jan 2011
Device: Onyx Boox Max,irex 800s
|
Thanks... question about cover thumbnails
Hi
Thanks for all the help on here, I am now running dr800+ and its looks cool. I particularly like the suspend feature (I was always worried that at some stage i would wear out the on/off switch) Just one question, i have lost my thumbnails, i see now i have to open each file to restore them, is there a patch out there that would do this for me ;-) I had the thubnails generation enabled, but when it was indexing i got some error message and it stopped), i then deleted and restored my book folder, but i can open each file and then the thumbnail appears. And to be fair, i have had this happen before the dr800+ upgrade. It would be nice if there was a patch out there that would save me from opening all my books! ;-) I think the upgrade looks great so far, I will continue to play with it... I also used winace on windows7, and had to resort to 7zip to unzip the files in the correct format ;-) but got it working ;-) One last thing, i notice now i have nothing in the system folder, its looks all to be working and i have the dr800+ in the programs folder. anyway, thanks for working on this... looks good so far. Paul |
02-15-2011, 06:26 AM | #142 |
Enthusiast
Posts: 43
Karma: 1000010
Join Date: Jan 2011
Device: Onyx Boox Max,irex 800s
|
Ha, Also this is strange, i re ran the programs/dr800+ program, as I thought i would try and re-index the files that way , however its booted, but it has booted back to the old ir800 settings, i did a reset device settings...
Anyways, now I will have to wait until i get home to look into this, at least i can still read my books, but guess what... I am already missing the new menus (so thats a good sign i like the new menus!! ;-) ) Weird though that it has rebooted with the old code, as there was nothing left in the system directory before, i am sure of that... oh well, i will check when i get home.... regards Paul |
02-15-2011, 06:41 AM | #143 |
Enthusiast
Posts: 43
Karma: 1000010
Join Date: Jan 2011
Device: Onyx Boox Max,irex 800s
|
i can not put this down ;-) i found my cable, plugged it in, and deleted the dr file in the system folder, and re ran dr800+, all back and working again..(he he don't do a system reset, else it looks like it runs the original dr800 file rather than the dr800+)
i can confirm all that remains is the dr.ini file in the system folder. Anyways, happy chappy, just now reall need to understand how the indexing works. have a good day. regards Paul |
02-15-2011, 07:24 AM | #144 |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
Hi, brigader,
When you install DR800+ it keeps a backup of original binaries so if you click on DR800+ installer a second time, it will delete DR800+ enhancements and restore original firmware files. On the other hand, I have the same problem with thumbnails generation. I think it's not related to DR800+ because it also happened to me before DR800+ existed. My guess is that the thumbnail indexer breaks at some time so it stops working. I haven't found any solution by now. Iņigo |
02-15-2011, 08:56 AM | #145 |
Enthusiast
Posts: 43
Karma: 1000010
Join Date: Jan 2011
Device: Onyx Boox Max,irex 800s
|
Thanks Inigo
Thanks for the reply, it's great to have the new menus... I will try and looking into the indexing at some point, but yes i agree i have had this issue before the dr800+...
Keep up the good work, ..... whens the next update ;-) I would love a PDF to fill the whole screen in landscape mode automatically with out zooming.. (I mainly read technical cisco manuals in PDF format) regards Paul Last edited by brigader; 02-15-2011 at 09:00 AM. |
02-15-2011, 03:07 PM | #146 |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
|
06-18-2011, 06:17 AM | #147 |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
DR800+ is almost ready for a new release.
Not many changes (you can see them at [1]), but as I could modify some previous default settings I'm asking here about your opinion. Some time ago I've added Mackx's (or DR1000, cant' remember now) option to show running tasks on the menu. I also recently added a new menu item to toggle taskbar visibility. Thus, I'm considering to make taskbar hidden by default (you can always show it selecting on the menu), as we can make more horizontal room and we can switch tasks from the menu. I don't like the idea to create a settings/configuration program just for this, too much work for a tiny feature. What do you think should be the default? Iņigo [1] https://bitbucket.org/inigoserna/dr800/changesets |
06-18-2011, 01:37 PM | #148 |
Guru
Posts: 999
Karma: 19985
Join Date: Dec 2008
Location: Netherlands
Device: iRex DR1000S
|
You can add the default value to gconf so it can be changed by modifying the settings in dr.ini manually? (Anyone with a lot of time can then create a settings-dialog for it afterwards. ;-)
|
06-18-2011, 01:44 PM | #149 | |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
Quote:
In fact I'd started to implement the hack to avoid running indexer in each reboot that we have been talking in other thread... and I needed a way to change the setting ;-) |
|
06-20-2011, 04:23 PM | #150 | |
Guru
Posts: 730
Karma: 72743
Join Date: Feb 2008
Location: Here or there
Device: iRex iLiad, iRex DR800S. K4NT. Kobo Aura, Aura One, Libra 2.
|
Quote:
I've added the new schema to gconf (key "/apps/dr800plus/show_taskbar" and value is a boolean). I can read the proper value from the program using gconf_client_* API. And if I change the value with Code:
gconftool-2 --type bool --set /apps/dr800plus/show_taskbar "true" But if I change the System/dr.ini value and reboot, value in gconf db is not updated and shows the old value. Btw, Code:
erconftool -e /apps/dr800plus I thought edited values from System/dr.ini were saved to gconf db, as a way to allow user customization. Am I missing something? Any idea? EDIT: a guess: maybe than sync only happens for "/apps/er/*" keys? EDIT2: my guess was correct, only keys "/apps/er/*" are sync-ed. And it needs a complete reboot to sync indeed, a "/etc/init.d/xserver-nodm restart" is not enough Last edited by Iņigo; 06-20-2011 at 06:10 PM. |
|
Tags |
dr800+ |
Thread Tools | Search this Thread |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DR800 Plugin development for DR800/DR1000 | yuri_b | iRex Developer's Corner | 0 | 09-18-2010 09:46 AM |
What is size of IREX DR800 and DR1000 | PocketGoods | iRex | 12 | 06-05-2010 04:58 AM |
IREX DR800 or DR1000? | sordie | Which one should I buy? | 8 | 03-21-2010 08:10 PM |
perl for the DR800/DR1000? | Mr. X | iRex | 1 | 03-16-2010 07:47 AM |