Ectaco and Aluratek firmwares - Page 2

manifestor · 01-31-2010, 09:54 AM

I'd like to know if the process of flashing between different firmwares from Aluratek and Jetbook is reversible. For eg, can I flash the Aluratek's with Jetbook's firmware and go back to Aluratek's firmware later? I read somewhere here that there's some kind of quirk with Aluratek's firmwares which try to identify the reader before flashing. Thanks in advance for your info.

Kralik · 01-31-2010, 03:22 PM

There are now quirks on both ends and it requires patched firmware. I've patched the Aluratek firmware to be able to be flashed onto a jetBook with 0.33g, and tselling patched 0.33g so that you can flash back to jetBook. Right now if you have jetBook 0.34b/c you can't flash to Libre (or vice versa). It's an easy fix, but just would take me time to add the file to bypass the check.

manifestor · 01-31-2010, 04:42 PM

Quote:

Originally Posted by Kralik

There are now quirks on both ends and it requires patched firmware. I've patched the Aluratek firmware to be able to be flashed onto a jetBook with 0.33g, and tselling patched 0.33g so that you can flash back to jetBook. Right now if you have jetBook 0.34b/c you can't flash to Libre (or vice versa). It's an easy fix, but just would take me time to add the file to bypass the check.

OMG this is more daunting than I thought. Does it mean if I acquire an Aluratek Libre in the first place, I'd need the patched 0.33g if I wanna try out the Jetbook firmware? And if I flash any version later than the 0.33g (patched one), I CANNOT go back to Libre's firmware anymore on my reader?

It surely is scary...

Kralik · 02-01-2010, 12:35 AM

It's all at your own risk... but what you said sounds correct. I wouldn't do anything at all if you are planning on using DRM, since neither has been confirmed with cross-flashing. I'm a bit over the scare since I've tried the three different Chinese firmwares and both Libre and jetBook firmware on my jetBook. Of course, others were not so lucky -- someone here ended up with a device that was "bricked" for about a month until the battery ran down and it somehow fixed itself.

manifestor · 02-01-2010, 02:10 AM

Quote:

Originally Posted by Kralik

It's all at your own risk... but what you said sounds correct. I wouldn't do anything at all if you are planning on using DRM, since neither has been confirmed with cross-flashing. I'm a bit over the scare since I've tried the three different Chinese firmwares and both Libre and jetBook firmware on my jetBook. Of course, others were not so lucky -- someone here ended up with a device that was "bricked" for about a month until the battery ran down and it somehow fixed itself.

I learned not long after I placed my order for the Aluratek Libre that it doesn't support Chinese. It kinda bothers me since Chinese is my first language and it doesn't make any sense if I can't read Chinese books on my reader. I was thinking about using the Dr. Yi's Chinese firmwares but then the format support is inadequate (no mobi, no epub). So I'd like to try out the Jetbook firmware to see if it would suit my needs more.

But then, no pdf reflow...sigh...

manifestor · 02-01-2010, 02:12 AM

duplicated

pendragginp · 02-05-2010, 09:52 AM

Does the Libre firmware support DRM? And if so, could I put it onto my jetbook? And also if so, would I have to remove the jetbook firmware first?

Also wondering: since the jetbook lite software supports drm, could I swap that out for my jetbook original firmware?

And - even if either of these thoughts are possible, does anyone think either of these would be a good idea, or would they be likely to cause a bunch of headaches?

Kralik · 02-05-2010, 10:11 AM

The Libre firmware runs ADE and does support DRM. I am currently running it on my jetBook (original) BUT I'm not sure if the cross-flashed firmware supports ADE. I haven't tried.

gr8npwrfl · 02-05-2010, 10:12 AM

Quote:

Does the Libre firmware support DRM? And if so, could I put it onto my jetbook? And also if so, would I have to remove the jetbook firmware first?

yes it does limited but you lose your dictionaries

Quote:

Also wondering: since the jetbook lite software supports drm, could I swap that out for my jetbook original firmware?

No the hardware is different

Quote:

And - even if either of these thoughts are possible, does anyone think either of these would be a good idea, or would they be likely to cause a bunch of headaches?

They are not worth it as the JBL firmware is being release for the JB any time now.

pendragginp · 02-05-2010, 10:40 AM

Okay, thanks everyone. I guess I'll wait a bit then and see if the jb original firmware is updated to support drm. If the update gets stalled for a long time then I'll do as Kralik did and upload the Libre firmware, since I'm not that interested in the jb dictionaries.

GA Russell · 02-05-2010, 01:41 PM

Quote:

Originally Posted by pendragginp

I'm not that interested in the jb dictionaries.

The jetBook dictionary is a real disappointment to me. There has only been one word that I looked up that the dictionary included.

Kris777 · 02-11-2010, 04:17 AM

Quote:

Originally Posted by GA Russell

The jetBook dictionary is a real disappointment to me. There has only been one word that I looked up that the dictionary included.

I found approx 8 from 10 words but it will be nice to add Oxford dictionary

gr8npwrfl · 02-12-2010, 03:27 PM

I wish there was a way to have one of the buttons on the side of the jetbook open particular books and then one to return.

That way while you are reading you could have one programmed to open the dictionary and then hit a single one to take you back to the previous document you were reading.

02-01-2010, 02:12 AM	#21
manifestor Connoisseur Posts: 75 Karma: 39 Join Date: May 2009 Device: Astak EZreader, Aluratek Libre Pro	duplicated Last edited by manifestor; 02-02-2010 at 03:03 AM.

02-12-2010, 03:27 PM	#28
gr8npwrfl The Wizard of OZ Posts: 143 Karma: 434 Join Date: Dec 2009 Location: Southern California Device: Jetbook Ipod Touch Wind Netbook	Wish there was a quick switch key I wish there was a way to have one of the buttons on the side of the jetbook open particular books and then one to return. That way while you are reading you could have one programmed to open the dictionary and then hit a single one to take you back to the previous document you were reading.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ECTACO mentions Calibre in their advertisment for ECTACO jetBook MINI	kacir	Calibre	1	09-12-2010 03:57 PM
Flashing back and forth between firmwares, then it broke.	manifestor	Ectaco jetBook	13	02-06-2010 05:00 PM
Comparison of all available V3 firmwares	Rapefruit	HanLin eBook	2	09-10-2009 06:16 AM
Why is OpenInkpot so much more stable than all the other firmwares?	Lbooker	OpenInkpot	15	07-12-2009 09:35 AM
Downloading other firmwares	dpierron	Sony Reader	0	04-20-2009 07:55 AM

01-31-2010, 09:54 AM	#16
manifestor Connoisseur Posts: 75 Karma: 39 Join Date: May 2009 Device: Astak EZreader, Aluratek Libre Pro	I'd like to know if the process of flashing between different firmwares from Aluratek and Jetbook is reversible. For eg, can I flash the Aluratek's with Jetbook's firmware and go back to Aluratek's firmware later? I read somewhere here that there's some kind of quirk with Aluratek's firmwares which try to identify the reader before flashing. Thanks in advance for your info.

01-31-2010, 03:22 PM	#17
Kralik Guru Posts: 609 Karma: 1013897 Join Date: Jul 2009 Device: Rooted NST	There are now quirks on both ends and it requires patched firmware. I've patched the Aluratek firmware to be able to be flashed onto a jetBook with 0.33g, and tselling patched 0.33g so that you can flash back to jetBook. Right now if you have jetBook 0.34b/c you can't flash to Libre (or vice versa). It's an easy fix, but just would take me time to add the file to bypass the check.

02-01-2010, 12:35 AM	#19
Kralik Guru Posts: 609 Karma: 1013897 Join Date: Jul 2009 Device: Rooted NST	It's all at your own risk... but what you said sounds correct. I wouldn't do anything at all if you are planning on using DRM, since neither has been confirmed with cross-flashing. I'm a bit over the scare since I've tried the three different Chinese firmwares and both Libre and jetBook firmware on my jetBook. Of course, others were not so lucky -- someone here ended up with a device that was "bricked" for about a month until the battery ran down and it somehow fixed itself.

02-05-2010, 09:52 AM	#22
pendragginp Guru Posts: 985 Karma: 4567263 Join Date: May 2009 Location: The End Of The Earth Device: Several	Does the Libre firmware support DRM? And if so, could I put it onto my jetbook? And also if so, would I have to remove the jetbook firmware first? Also wondering: since the jetbook lite software supports drm, could I swap that out for my jetbook original firmware? And - even if either of these thoughts are possible, does anyone think either of these would be a good idea, or would they be likely to cause a bunch of headaches?

02-05-2010, 10:11 AM	#23
Kralik Guru Posts: 609 Karma: 1013897 Join Date: Jul 2009 Device: Rooted NST	The Libre firmware runs ADE and does support DRM. I am currently running it on my jetBook (original) BUT I'm not sure if the cross-flashed firmware supports ADE. I haven't tried.

02-05-2010, 10:40 AM	#25
pendragginp Guru Posts: 985 Karma: 4567263 Join Date: May 2009 Location: The End Of The Earth Device: Several	Okay, thanks everyone. I guess I'll wait a bit then and see if the jb original firmware is updated to support drm. If the update gets stalled for a long time then I'll do as Kralik did and upload the Libre firmware, since I'm not that interested in the jb dictionaries.