Tablet Generic Car Chargers

MooseFam5 · 03-16-2012, 05:00 PM

I want to confirm my understanding of options related to charging the Nook Tablet. It is my understanding that this most important piece of the puzzle is the cord- as this determines the voltage and amperage supplied to the Tablet (assuming the source is sufficient). So as long as I'm using the Nook Tablet charging cable, I should be able to use a non-B&N car charger that puts out something in the neighborhood of ~1.9 amps at 5 DCV.

I see a number of these specifically marketed for charging tablets that put out that much amperage as opposed to the generic USB chargers that seem to top out around 1 amp. I should be able to plug a USB adapter into the power source in the car then connect the Tablet's charging cable.

Do I have this correct? I'd like to pick up a USB adapter for the car but hate to spend $25 on the B&N kit.

geertm · 03-16-2012, 06:11 PM

Quote:

Originally Posted by MooseFam5

I want to confirm my understanding of options related to charging the Nook Tablet. It is my understanding that this most important piece of the puzzle is the cord- as this determines the voltage and amperage supplied to the Tablet (assuming the source is sufficient). So as long as I'm using the Nook Tablet charging cable, I should be able to use a non-B&N car charger that puts out something in the neighborhood of ~1.9 amps at 5 DCV.

I see a number of these specifically marketed for charging tablets that put out that much amperage as opposed to the generic USB chargers that seem to top out around 1 amp. I should be able to plug a USB adapter into the power source in the car then connect the Tablet's charging cable.

Do I have this correct? I'd like to pick up a USB adapter for the car but hate to spend $25 on the B&N kit.

The NT charger and charger cable have 2 extra wires to supply twice as much power to the NT as a regular USB charger/cable. The cable also has some electronics that puts the NT in power charging mode.

You can use any regular USB charger to charge the NT, but it will not power charge. So it will take about 7 hours instead of 3.5 to fully charge.

MooseFam5 · 03-16-2012, 06:33 PM

Sorry to be dense here- so does that mean I should be able to use a generic USB adapter that puts out ~2 amps with the B&N cable and get equivalent charging as the B&N adapter? Or is it the combo of B&N adapter and B&N cable that does the trick.

geertm · 03-16-2012, 07:42 PM

Quote:

Originally Posted by MooseFam5

Sorry to be dense here- so does that mean I should be able to use a generic USB adapter that puts out ~2 amps with the B&N cable and get equivalent charging as the B&N adapter? Or is it the combo of B&N adapter and B&N cable that does the trick.

It is the combo that does the trick. A regular charger does not supply power on the two extra wires (because those are not part of the official USB specification).

MooseFam5 · 03-17-2012, 10:36 AM

Thanks- that was exactly the information that I was looking for!

kevinp · 03-17-2012, 10:41 PM

I don't mean to hijack this thread, but does anyone know of another source to get the cables with the extra wires? I've read lots of complaints about the quality of the B&N cables and I'd rather pay $5 than $15.

03-16-2012, 05:00 PM	#1
MooseFam5 Enthusiast Posts: 30 Karma: 22318 Join Date: Oct 2011 Location: New York, USA Device: Nook STR, Nook Tablet	Generic Car Chargers I want to confirm my understanding of options related to charging the Nook Tablet. It is my understanding that this most important piece of the puzzle is the cord- as this determines the voltage and amperage supplied to the Tablet (assuming the source is sufficient). So as long as I'm using the Nook Tablet charging cable, I should be able to use a non-B&N car charger that puts out something in the neighborhood of ~1.9 amps at 5 DCV. I see a number of these specifically marketed for charging tablets that put out that much amperage as opposed to the generic USB chargers that seem to top out around 1 amp. I should be able to plug a USB adapter into the power source in the car then connect the Tablet's charging cable. Do I have this correct? I'd like to pick up a USB adapter for the car but hate to spend $25 on the B&N kit.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-600 AC chargers	Doverdave	Sony Reader	3	02-01-2012 02:19 PM
Car Mount thread (post her if you have car moutn ideas)	PCweber	enTourage eDGe	2	10-07-2011 05:06 PM
AC charger and DC (car) chargers are available to Walmart	arcticmaniac	enTourage eDGe	12	07-16-2011 03:19 PM
Two Home & Car PSP chargers, $10 today (Dec 9 '09)	jj2me	Sony Reader	0	12-09-2009 12:01 PM

03-16-2012, 06:33 PM	#3
MooseFam5 Enthusiast Posts: 30 Karma: 22318 Join Date: Oct 2011 Location: New York, USA Device: Nook STR, Nook Tablet	Sorry to be dense here- so does that mean I should be able to use a generic USB adapter that puts out ~2 amps with the B&N cable and get equivalent charging as the B&N adapter? Or is it the combo of B&N adapter and B&N cable that does the trick.

03-17-2012, 10:36 AM	#5
MooseFam5 Enthusiast Posts: 30 Karma: 22318 Join Date: Oct 2011 Location: New York, USA Device: Nook STR, Nook Tablet	Thanks- that was exactly the information that I was looking for!

03-17-2012, 10:41 PM	#6
kevinp Fanatic Posts: 580 Karma: 3549018 Join Date: Jul 2004 Location: Michigan Device: Kindle Scribe, Kindle PW (10th & 11th gen); Fire HD 10	I don't mean to hijack this thread, but does anyone know of another source to get the cables with the extra wires? I've read lots of complaints about the quality of the B&N cables and I'd rather pay $5 than $15.