01-28-2008, 09:40 AM | #46 | |
Guru
Posts: 976
Karma: 687
Join Date: Nov 2007
Device: Dell X51v; iLiad v2
|
A dropbear package for installation on memory card
Here is a package I prepared for my own convenience. Maybe it will save some peopel's precious time. This package won't copy any file to your iLiad. All your have to do is change root password.
prerequisite: 1. Have installed developer's package. 2. Have a mrxvt in your memory card. 3. Your router offers DHCP service. Install: 1. Unzip the attached file to any place in your memory card. After unzipped, a directory "sshd" should emerge. 2. In mrxvt, execute "passwd" to change your root password. There is no old password. Just type your new password twice. 3. You can run dropbear with wired connection now. In your contentlister, go to "sshd", tap on "Enable SSH - wired". If everything goes well, you can connect iLiad from your PC using PuTTY. If you are not sure the ip address of Iliad, type "ifconfig" in mrxvt. Login with root and password. 4. For wireless connection, you have to modify "sshd\ssh-wlan-enable \run.sh" in the package. Find the line: Quote:
For wpa, just replace "YOUR_Pre_Shared_Phrase" with plain password text (not hex code). For wep, replace "wpa" with "wep", and replace YOUR_Pre_Shared_Phrase" with hex code. Then your can run dropbear with wireless connection. 5. To stop dropbear and wired/wireless connection, tap on "Disable SSH" in your contentlist. Note: I only tested it with wireless wpa connection. For wep users, please test it yourself. I didn't test it with wired connection. But I think it should be working fine with wired connection. Edited: Although scp is included in my package, I didn't set PATH to it. scp cannot be called before PATH is set. If you use WinSCP, you can set PATH in command toolbar in WinSCP after connect to iLiad using ssh. Last edited by ericshliao; 02-05-2008 at 07:13 PM. |
|
02-01-2008, 07:51 AM | #47 | |
Member
Posts: 21
Karma: 12
Join Date: Sep 2007
Device: Irex ILiad
|
Quote:
Regards Fodiator |
|
Advert | |
|
03-27-2008, 03:21 PM | #48 |
Junior Member
Posts: 7
Karma: 10
Join Date: Feb 2008
Device: Iliad
|
May I say thanks ericshliao also. I tried it out with WPA and it worked like a charm.
-Ksira |
05-28-2008, 08:48 AM | #49 |
Junior Member
Posts: 8
Karma: 10
Join Date: May 2008
Device: iRex iLiad
|
Wep works like a charm! Thanks, Eric
One question though, The iLiads IP address is not 10.0.0.200. So, I guess it's dynamic, not static. Oh, and do I have to use Putty? Doesn't gnome-terminal/Konsole have support for OpenSSH? |
05-31-2008, 02:20 PM | #50 |
Zealot
Posts: 119
Karma: 603
Join Date: May 2008
Location: Oslo, Norway
Device: irex iliad
|
Is it only possible to connect with ethernet? I only have wireless connectivity, and even though dropbear is running, I still haven´t been able to connect to my iliad via ssh
|
Advert | |
|
06-02-2008, 06:49 PM | #51 |
Junior Member
Posts: 8
Karma: 10
Join Date: May 2008
Device: iRex iLiad
|
WEP works here. According to earlier responses WPA works great too.
|
07-25-2008, 03:39 PM | #52 |
Junior Member
Posts: 2
Karma: 10
Join Date: Jul 2008
Device: Iliad
|
How to enable scp?
Hi,
I am lost. I have installed ericshliao's package. ssh access with putty works fine but what do I have to do to enable access with winscp? I have tried to copy scp to /usr/local/bin (so in the PATH), no result I have tried to add PATH=$PATH:/path/to/scp to run.sh, no result. In both cases I get error 127 indicating scp is not found. It must be very simple but I do not manage. Tks, Maarten |
07-25-2008, 06:08 PM | #53 |
Connoisseur
Posts: 80
Karma: 111
Join Date: Apr 2008
Device: iliad V2; ipad 2-64GB,3G
|
Do we really need SSH to connect wirelessly??
Hi all,
I don't know if anyone is in my case, but I never had to install SSH to be able to access my router wirelessly... I have seen a lot of emails back and forth for a couple of months now, so I am wondering if the type and brand of the router used is not for something... When I first got my iliad, after downloading the upgrade 2.12, I just add to configure my wireless access with the WPA password and I got connected the first time!!! I am using a Netgear WGT 624, with WPA protection. I will be really curious to know if anyone was able to connect with WPA protection without the SSH installed as well?? Thanks, Dabon. |
07-26-2008, 01:58 PM | #54 |
Guru
Posts: 976
Karma: 687
Join Date: Nov 2007
Device: Dell X51v; iLiad v2
|
SSH is not the prerequisite for iLiad to access WLAN through WPA. Maybe you mis-understood SSH's purpose.
|
07-27-2008, 06:16 AM | #55 |
Guru
Posts: 976
Karma: 687
Join Date: Nov 2007
Device: Dell X51v; iLiad v2
|
Try "export PATH=/media/card/programs/sshd/_usr/bin" in WinSCP command session. This line will set path to scp on your iLiad.
|
07-28-2008, 01:52 PM | #56 |
Junior Member
Posts: 2
Karma: 10
Join Date: Jul 2008
Device: Iliad
|
Solved: How to enable scp?
Well,
At the winscp session sheet I had to choose "scp" as protocol, "sftp(allow scp fallback)" did not work. Maarten |
11-26-2008, 11:05 PM | #57 |
Member
Posts: 20
Karma: 10
Join Date: Nov 2008
Device: iLiad 2nd
|
Try to connect iLiad with winscp, get a error code 127:
Cannot initialize SFTP protocol. Is the host running a SFTP server? Do I miss something on iLiad or my pc? |
11-27-2008, 07:08 AM | #58 |
Addicted to Porting
Posts: 1,697
Karma: 7194
Join Date: Oct 2006
Location: Indianapolis, IN
Device: iRex iLiad, Nokia 770, Samsung i760
|
|
11-27-2008, 12:06 PM | #59 |
Member
Posts: 20
Karma: 10
Join Date: Nov 2008
Device: iLiad 2nd
|
Thanks Adam. B!
Do as much as I can but still the same, NO WORK! I give it up. I just want to move a font file from CF card to /home/root/.fonts/ how can we do with mrxvt command?(maybe easier for you) The whole THREE DAYS on try to connect the iLiad to pc, I don't want to try it anymore, just let it be. Thank you again and hope you can give me an instruction. |
11-27-2008, 12:14 PM | #60 |
Connoisseur
Posts: 80
Karma: 111
Join Date: Apr 2008
Device: iliad V2; ipad 2-64GB,3G
|
Adam expertise requested
Hi Adam,
Happy Thanksgiving!! I know that this might not be the right place for this post, but a few months ago I sent a request for help that you might have missed with all the posts and emails that you are dealing with on this forum..so I thought that I might get your attention by writing here..This was related to Wikipedia and the Thread was: Mounting/Recognizing ext2 CF card. I will really appreciate if you could take a look at my last comment/question and the file that I did attach on this particular thread. Thank you very much by anticipation. Take good care! Dabon. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
iLiad removing unbrickable from boot | ragdoll | iRex Developer's Corner | 5 | 01-25-2010 03:48 AM |
iLiad How to make iliad into a SSH server and connect with iLiad | tudou331100 | iRex Developer's Corner | 21 | 02-06-2009 05:35 AM |
How to uninstall unbrickable | ragdoll | iRex | 2 | 01-22-2008 03:20 PM |
iLiad "Extra"-Unbrickable -- A supplement | jharker | iRex Developer's Corner | 2 | 05-04-2007 12:17 PM |
iLiad Unbrickable Developer Iliad Idea | scotty1024 | iRex Developer's Corner | 12 | 12-24-2006 06:15 AM |