Libre Pro is not recognized by computer

Goodenough · 12-21-2010, 06:13 PM

It all started when i attempted to update the firmware, i followed the official instructions straight from Aluratek to the T.

long story short, the update failed with the libre pro giving me a Hardware Error.

well ever since then both the internal memory and the SD card say "No Corresponding Files Found"............

it will not connect to my computer. the odd thing is, i can hear the ding from my computer that says a device is connected.

any help would be much appreciated

Cody

Xanthe · 12-21-2010, 10:12 PM

Updating from what version # to what version #?

spensar · 12-22-2010, 12:59 AM

Did you try a reset?

Ken Maltby · 12-22-2010, 03:23 AM

The resetting to factory defaults using the diagnostic screen has worked for some.
Luck;
Ken

bla · 12-22-2010, 11:03 AM

Try powering on/off while connected, this worked for me on vista, also try it with and without sd card.
Other tip... get yourself a card adaptor for your pc you will find it much faster to transfer files

bla

jbcohen · 12-22-2010, 12:21 PM

Does other USB appliances have this problem?

spensar · 12-22-2010, 11:39 PM

Quote:

Originally Posted by Ken Maltby

The resetting to factory defaults using the diagnostic screen has worked for some.
Luck;
Ken

I reset by pushing using a pin to push the reset button in the back. Didn't know about resetting otherwise!

Ken Maltby · 12-23-2010, 12:55 AM

To enter the diagnostics screen:
Reset the device. Then hold down three buttons. They are: "on/off" "zoom" and "menu". When you see the jetBook screen let go of "on.off". Keep holding the "zoom" and "menu" keys until you see a 16 item screen. It's tricky, so it may take a couple of tries.

Then you can restore the JBL to factory defaults.

After that is done reset the JBL.

The "reset" is the reset button on the back.

Luck;
Ken

Goodenough · 12-24-2010, 02:02 AM

Quote:

Originally Posted by Ken Maltby

To enter the diagnostics screen:
Reset the device. Then hold down three buttons. They are: "on/off" "zoom" and "menu". When you see the jetBook screen let go of "on.off". Keep holding the "zoom" and "menu" keys until you see a 16 item screen. It's tricky, so it may take a couple of tries.

Then you can restore the JBL to factory defaults.

After that is done reset the JBL.

The "reset" is the reset button on the back.

Luck;
Ken

Thank you very much good sir,

this has worked perfectly.

Rub · 11-01-2016, 12:14 PM

I had the same problem. I formatted my libre pro aluratek from my mac and after that everytime I tried to upload books either with my mac (later I tried with a windows lap) it looked like I uploaded them but they did not appear in the ereader. Instead I received the message that there were no "corresponding files". It was very strange because my computer did recognized them. So I resetted it pressing the power, zoom and menu buttons. I got into a menu where I could reset it to the factory defaults and now it works! Thanks for the info.

Grammar Matters · 04-25-2023, 01:08 PM

I know this thread is over a decade old, but I'm hoping someone here may still have the firmware for the LIBRE AEBK01WF.

I have Software v0.15k Patch 15.

When I read the manual for it, a Find function is mentioned for searching keywords. My device does not seem to have that. As well, I am hoping it can work with links in a epub file: I have the CIA World Factbook of almost 3000 pages, and each country has a 'hyperlink' that I cannot use. A hyperlink function using the 0-9 keys, or the arrow keys, would be nice as well as the Find, but either would be better than guessing at a page out of 3000.

I don't know if either of those features are part of the newer firmware- I think it is at 0.18 from earlier in this thread.

Odio · 10-24-2023, 10:05 PM

Quote:

Originally Posted by Grammar Matters

I know this thread is over a decade old, but I'm hoping someone here may still have the firmware for the LIBRE AEBK01WF.

I have Software v0.15k Patch 15.

When I read the manual for it, a Find function is mentioned for searching keywords. My device does not seem to have that. As well, I am hoping it can work with links in a epub file: I have the CIA World Factbook of almost 3000 pages, and each country has a 'hyperlink' that I cannot use. A hyperlink function using the 0-9 keys, or the arrow keys, would be nice as well as the Find, but either would be better than guessing at a page out of 3000.

I don't know if either of those features are part of the newer firmware- I think it is at 0.18 from earlier in this thread.

Mine is currently running v0.19d, patch v19

If you can show me how to dump it, I'll post it

12-21-2010, 06:13 PM	#1
Goodenough Junior Member Posts: 2 Karma: 10 Join Date: Dec 2010 Device: Aluratek Libre pro	Libre Pro is not recognized by computer It all started when i attempted to update the firmware, i followed the official instructions straight from Aluratek to the T. long story short, the update failed with the libre pro giving me a Hardware Error. well ever since then both the internal memory and the SD card say "No Corresponding Files Found"............ it will not connect to my computer. the odd thing is, i can hear the ding from my computer that says a device is connected. any help would be much appreciated Cody Last edited by Goodenough; 12-21-2010 at 06:26 PM. Reason: problem happened again

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Libre Pro not appearing on my computer	jezebel	Ectaco jetBook	3	08-09-2010 04:37 PM
libre pro	bla	Introduce Yourself	6	07-22-2010 01:24 AM
Pocket Pro: USB device not recognized	chiachao	Astak EZReader	11	05-04-2010 09:13 PM
PRS-600 PRS600 not recognized by computer	planters	Sony Reader	5	12-17-2009 07:25 AM
Cybook not recognized by computer	cmbs	Bookeen	47	01-04-2008 05:58 PM

12-21-2010, 10:12 PM	#2
Xanthe Plan B Is Now In Force Posts: 1,894 Karma: 8086979 Join Date: Jan 2010 Location: Surebleak Device: Aluratek,Sony 350/T1,Pandigital,eBM 911,Nook HD/HD+,Fire HDX 7/8.9,PW2	Updating from what version # to what version #?

12-22-2010, 12:59 AM	#3
spensar Member Posts: 14 Karma: 10 Join Date: Dec 2010 Device: Aluratek Libre Pro	Did you try a reset?

12-22-2010, 03:23 AM	#4
Ken Maltby Wizard Posts: 4,465 Karma: 6900052 Join Date: Dec 2009 Location: The Heart of Texas Device: Boox Note2, AuraHD, PDA,	The resetting to factory defaults using the diagnostic screen has worked for some. Luck; Ken

12-22-2010, 11:03 AM	#5
bla E bookworm Posts: 358 Karma: 2013666 Join Date: Jul 2010 Location: Ontario, Canada Device: Sony PRS T1,Android Tablet, I phone	Try powering on/off while connected, this worked for me on vista, also try it with and without sd card. Other tip... get yourself a card adaptor for your pc you will find it much faster to transfer files bla

12-22-2010, 12:21 PM	#6
jbcohen Wizard Posts: 3,025 Karma: 11196738 Join Date: Oct 2010 Location: Piper College Device: Samsung A21	Does other USB appliances have this problem?

12-23-2010, 12:55 AM	#8
Ken Maltby Wizard Posts: 4,465 Karma: 6900052 Join Date: Dec 2009 Location: The Heart of Texas Device: Boox Note2, AuraHD, PDA,	To enter the diagnostics screen: Reset the device. Then hold down three buttons. They are: "on/off" "zoom" and "menu". When you see the jetBook screen let go of "on.off". Keep holding the "zoom" and "menu" keys until you see a 16 item screen. It's tricky, so it may take a couple of tries. Then you can restore the JBL to factory defaults. After that is done reset the JBL. The "reset" is the reset button on the back. Luck; Ken

11-01-2016, 12:14 PM	#10
Rub Junior Member Posts: 1 Karma: 10 Join Date: Oct 2016 Device: aluratek	I had the same problem. I formatted my libre pro aluratek from my mac and after that everytime I tried to upload books either with my mac (later I tried with a windows lap) it looked like I uploaded them but they did not appear in the ereader. Instead I received the message that there were no "corresponding files". It was very strange because my computer did recognized them. So I resetted it pressing the power, zoom and menu buttons. I got into a menu where I could reset it to the factory defaults and now it works! Thanks for the info.

04-25-2023, 01:08 PM	#11
Grammar Matters Junior Member Posts: 3 Karma: 10 Join Date: Apr 2023 Device: Aluratek LIBRE	I know this thread is over a decade old, but I'm hoping someone here may still have the firmware for the LIBRE AEBK01WF. I have Software v0.15k Patch 15. When I read the manual for it, a Find function is mentioned for searching keywords. My device does not seem to have that. As well, I am hoping it can work with links in a epub file: I have the CIA World Factbook of almost 3000 pages, and each country has a 'hyperlink' that I cannot use. A hyperlink function using the 0-9 keys, or the arrow keys, would be nice as well as the Find, but either would be better than guessing at a page out of 3000. I don't know if either of those features are part of the newer firmware- I think it is at 0.18 from earlier in this thread.