Kobo µSD Card Image Requests

[DNSB]

Originally Posted by Kob

Hi, can you send me .img sd file for kobo Clara Hd? Thanks a lot

You will need to have Private Messages enabled before you can be sent the link. If you don't see that option in the "Edit Options" of the User control panel, you should post in the Requests to enable Private Messages thread to ask for PMs to be enabled.

Once PMs are enabled, please post again in this thread )Kobo µSD Card Image Requests) to let me know.

[DNSB]

PMs sent.

[Luukatony]

Hello, i would like the image for Kobo N306 Nia please. Thank you very much

[Zepelin16]

Hi
I would like the firmware image for a Kobo Glo N613.

Thanks in advance

[padhug]

I would like the firmware image for a Kobo N249 Clara HD. Thanks.

[sevenisalie]

I would like the firmware image for a Kobo N249 Clara HD

[Jennievdm]

I would like the firmware image for a Kobo Nia N306. Thanks!

[FlickUnderStar]

I would like to thank the Denizens of mobileread.com for their help.

I revived my old Kobo Touch N905C this morning.
It has been sitting on a shelf dead since 2019.
I stumbled across a replacement battery for in on TEMU.
I had given up in 2019 trying to find a battery for it. I ordered the two wire version which is what is in my Kobo. I was disappointed when I went to install it that the connector was not the same as the one on my board. I simply cut the old end off the old battery and soldered on the new one.

Kobo lights on the top where now working but still would not wake up.
I let it charge for a day or 2 but still dead.

Started reading up on this site and learned that can be the behaviour of a corrupted SD CARD. I ordered a new 8GB one and asked for the firmware to be PMed to me.

Put the firmware and booted right up! However setup would not completed as the software was to old to connect to kobo wireless or when with computer.

This is a known issue, solution is upgrade to newer version of software.
But as I learned the hard way you can not go latest version it is to far of a jump in one upgrade. I would install then rollback.

So I read you need to got version 4.35 to get setup to completed.
I loaded that manually on the SD card and kobo is working.
I synced all my books wireless and when it was done, I sync it again and it took the latest update.

I also extended the FAT32 partition to use the rest of the space on the sd card. So it now can hold 6GBs of books.

I think I will put card back and out and image it for a full backup.

Thank you everyone, that was a fun project.
Vic

[rems38650]

bonjour, j’ai fais une demande pour Kobo N249 Clara HD (4.38.21908)
cordialement

[rems38650]

bonjour, avez vous l'image micro usb, je vous remercie
cordialement

[DNSB]

Originally Posted by FlickUnderStar

I would like to thank the Denizens of mobileread.com for their help.

I revived my old Kobo Touch N905C this morning.
It has been sitting on a shelf dead since 2019.
I stumbled across a replacement battery for in on TEMU.
I had given up in 2019 trying to find a battery for it. I ordered the two wire version which is what is in my Kobo. I was disappointed when I went to install it that the connector was not the same as the one on my board. I simply cut the old end off the old battery and soldered on the new one.

I also extended the FAT32 partition to use the rest of the space on the sd card. So it now can hold 6GBs of books.

I think I will put card back and out and image it for a full backup.

Thank you everyone, that was a fun project.
Vic

Great to hear that you persevered and got your Touch working again!

[DNSB]

PMs sent.

[Luukatony]

Hello, can i please acquire the firmware for: Kobo N705 Mini (4.38.21908 & 3.19.5761-s firmware revisions).
Thank you!

[DNSB]

PM sent.