|
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
![]() Posts: 7
Karma: 10
Join Date: Jun 2024
Device: Kindle Paperwhite 3
|
Weird Chinese JDRead e-reader, need help identity the equivalent model
So my friend just gave me this e-reader with a dead battery and it seems like the thing used Android and when I finally disassemble the thing, it seems like the thing is manufacture by Onyx. The motherboard got boox_jd_v03 marking and it seems like this one is manufactured in 2018. The CPU is a i.mx6 mcimx6l8dvn10ab CPU and apparently having 8GB of LPDDR2 ram (part number: nt6tl256t32ba-g0) and 8gb of emmc ? The model according to JDRead website is JDRead 1. The thing only have Chinese interface and does not have any option to change to English. I can't turn on ADB as there isn't an option to. I need some help in identifying the equivalent international version and somehow turn on ADB to backup the system of this device
|
![]() |
![]() |
![]() |
#2 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,839
Karma: 12000011
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
I don't know much about the old Onyx stuff. The RAM is 8 Gbit, i.e. 1 GByte.
That single core Freescale iMX6 processor is the same as the B&N Glow series from Netronix. I don't see a conspicuous UART on this thing, but you might check the gold dots near where the power switch goes on. The dots by the USB and the eink connector are probably not anything. It's probably all 1.8V logic. If you have a terminal app you can stop it booting and make it run fastboot. I wrote a utility for booting this if it becomes bricked (running off the iMX6 ROM bootloader) but you need a copy of the uboot and the Android boot image. See imxlink.exe in my sig. |
![]() |
![]() |
![]() |
#3 |
Junior Member
![]() Posts: 7
Karma: 10
Join Date: Jun 2024
Device: Kindle Paperwhite 3
|
That 4 pins looks like it could be a possible UART pins, is it possible to check that using a multimeter ?
|
![]() |
![]() |
![]() |
#4 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,839
Karma: 12000011
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
Yes, a meter could give you indications.
Some consoles are only active in booting and not during Android. Look for something that is at 1.8V normally and wiggles lower when booting. You look for the TX out of the UART first, then see if you can find RX. If there are 4 pins one of them is ground and one might be voltage supply, 1.8V or 3.3V |
![]() |
![]() |
![]() |
#5 |
Junior Member
![]() Posts: 7
Karma: 10
Join Date: Jun 2024
Device: Kindle Paperwhite 3
|
Also, what's the posspossibility of porting English to this Android image ?
|
![]() |
![]() |
![]() |
#6 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,839
Karma: 12000011
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
I don't know the old models. You have to find what the English model is.
If you want to turn this into a wall clock it doesn't matter what the system language is. My old B&N Glow3 (likewise Android 4.4.2) is my wall clock. You may be able to enable ADB in recovery. Or the UART may be live in Android. |
![]() |
![]() |
![]() |
#7 |
Junior Member
![]() Posts: 4
Karma: 10
Join Date: Jul 2024
Device: kobo,pocketbook
|
I have Jdread Venus , but it made by Boyue
It into ADB mode method : power off > push reset button , keep it > stick in usb cable |
![]() |
![]() |
![]() |
#8 |
Junior Member
![]() Posts: 7
Karma: 10
Join Date: Jun 2024
Device: Kindle Paperwhite 3
|
Where is this reset button ? Is it the power button ?
|
![]() |
![]() |
![]() |
#9 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Jul 2024
Device: boox leaf3
|
maybe this will help:
https://www.bilibili.com/read/cv17065591/ Step: 1. switch on the wifi 2. set password to 0423, and a Chinese phone number 3. click device info, quick click system version (about 10 times), then it will into dev mode. 4. use `kingroot` to root the device. .... |
![]() |
![]() |
![]() |
#10 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 2,839
Karma: 12000011
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
I wouldn't put King Root on anything.
|
![]() |
![]() |
![]() |
#11 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Jul 2024
Device: boox leaf3
|
some software used in the post.
1dr: https://1drv.ms/u/s!AggSNd2ELm32iqhe...UTSoQ?e=ZwsMSe The official firmware shared in the post is too large, so I didn't upload. like `0c830e108bd3763858f415ad4f215f06.upx` etc (about 18 entries, each 300MiB) |
![]() |
![]() |
![]() |
#12 |
Junior Member
![]() Posts: 7
Karma: 10
Join Date: Jun 2024
Device: Kindle Paperwhite 3
|
I tried to do according to the guide but kingroot does not recognize my device
|
![]() |
![]() |
![]() |
#13 |
Junior Member
![]() Posts: 4
Karma: 10
Join Date: Jul 2024
Device: kobo,pocketbook
|
like bthis
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is there a Calibre equivalent ebook reader app in Android and iOS, that can read | avnermoshkovitz | Viewer | 19 | 07-17-2021 06:49 PM |
Calibre Reader position to Kindle equivalent. | jorgemtrevino | Recipes | 0 | 09-11-2012 09:54 PM |
Ended EZ Reader (6"), Foxit eSlick or equivalent ? | smallhagrid | Flea Market | 6 | 11-07-2011 10:43 PM |
Read Chinese books in Sony Reader PRS900 using Chinese Fonts | PSL | ePub | 3 | 10-08-2010 08:11 AM |
What model is this reader? | jjosk | More E-Book Readers | 0 | 09-17-2010 07:55 AM |