Telnet over USB from Windows to Libra 2

ajkessel · Today, 12:57 AM

Has anyone managed to telnet over USB from a Windows box to a Libra 2? I've followed these instructions which are for Clara, and I do see a usb0 network device appear on my Libra 2 but I have not been able to figure out how to access it from Windows. It seems like the device crashes and reboots when I enable the usb0 network interface and then connect it via USB to the Windows box. I'm not sure if the problem is on the Windows side or on the Libra. Does anyone have any wisdom to share?

DNSB · Today, 01:52 AM

How did you work around the missing items that the Clara HD firmware contains but the Libra 2 firmware does not? There are 22 files in the ./drivers/mx6sll-ntx/usb/gadget directory on a Clara HD but only 7 in that directory on the Libra 2.

When I look at the page you linked, only 1 of the files listed (g-ether.ko) in the 8 insmod commands is found in the Libra 2 firmware in the ./drivers/mx6sll-ntx/usb/gadget. The configfs.ko, libcomposite.ko, u_ether.ko, usb_f_ecm.ko, usb_f_eem.ko, usb_f_ecm_subset.ko and usb_f_rndis.ko are not seem to be available in the Libra 2 firmware I looked at.

Today, 12:57 AM	#1
ajkessel Connoisseur Posts: 60 Karma: 10 Join Date: Jul 2017 Location: Boston Device: Kobo Libra 2	Telnet over USB from Windows to Libra 2 Has anyone managed to telnet over USB from a Windows box to a Libra 2? I've followed these instructions which are for Clara, and I do see a usb0 network device appear on my Libra 2 but I have not been able to figure out how to access it from Windows. It seems like the device crashes and reboots when I enable the usb0 network interface and then connect it via USB to the Windows box. I'm not sure if the problem is on the Windows side or on the Libra. Does anyone have any wisdom to share? Last edited by ajkessel; Today at 12:58 AM. Reason: typo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kobo Libra keeps dropping telnet	shoelesshunter	Kobo Developer's Corner	1	07-27-2020 12:11 AM
Libra Libra special usb lead?	Valkrider	Kobo Reader	22	04-29-2020 04:40 AM
Kindle PW3 with USB networking enabled cannot telnet to MacOS	tjnkys	Kindle Developer's Corner	4	09-14-2016 12:21 PM
bigger SD card, smaller partitions: shown in gparted with USB conn. - no telnet?	lordofazeroth	Kobo Developer's Corner	1	01-17-2014 06:49 AM
USBNetwork USB Driver & Telnet on Windows XP SP3	namati	Kindle Developer's Corner	0	02-24-2012 01:20 AM

Today, 01:52 AM	#2
DNSB Bibliophagist Posts: 37,474 Karma: 149856306 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	How did you work around the missing items that the Clara HD firmware contains but the Libra 2 firmware does not? There are 22 files in the ./drivers/mx6sll-ntx/usb/gadget directory on a Clara HD but only 7 in that directory on the Libra 2. When I look at the page you linked, only 1 of the files listed (g-ether.ko) in the 8 insmod commands is found in the Libra 2 firmware in the ./drivers/mx6sll-ntx/usb/gadget. The configfs.ko, libcomposite.ko, u_ether.ko, usb_f_ecm.ko, usb_f_eem.ko, usb_f_ecm_subset.ko and usb_f_rndis.ko are not seem to be available in the Libra 2 firmware I looked at.