One-Click Install Packages for KOReader & Plato

[JSWolf]

Originally Posted by kusanagi

https://drive.google.com/file/d/1gub...usp=drive_link
Here’s the result of steps 2 and 3; I completed them simultaneously during one connection of the e-reader to the computer. I’m unable to edit my prev message so i just add one more

What you should do is uninstall KFMon and install NickelMenu. The reason is that KFMon fails after every firmware update and KoReader does not. So you would have to reinstall KFMon after every firmware update. It's a lot easier to use NickelMenu.

[kusanagi]

Originally Posted by JSWolf

What you should do is uninstall KFMon and install NickelMenu.

I don’t quite understand what you mean - NickelMenu already in the archive with the KOReader + Plato package. Or do you mean that after uninstalling using the method David mentioned, I also need to reinstall NickelMenu separately? After all three steps? The method David suggested works overall, but some strange menu items appear, as I showed in the video. In general, I could leave it as is since everything mostly works fine.

If not, that's exactly what I tried to do. Unfortunately, I’m not ready to dive into programming just to make the e-reader perform the most basic functions it was purchased for. My current problem is that the device freezes when launching Plato after loading books or updating the library, whereas KOReader doesn’t have this issue. Thats appears just after running script KOReader + Plato, unpluging for update and then uploading my library. Before uploading my library Plato starting without some issues. It’s not that I absolutely need Plato - it’s just that I’m curious why it used to start without any problems, but now it doesn’t, even though I’m doing everything the same way as before.

The reason is that KFMon fails after every firmware update and KoReader does not. So you would have to reinstall KFMon after every firmware update. It's a lot easier to use NickelMenu.

As for the constant KFMon updates, the latest firmware is installed after every reboot, and then I simply disable Wi-Fi. Secondly, I tried reinstalling KFMon using the script in the latest archive from this thread on first page, but Plato still freezes. You saw on video - [KFMon] Launched plato.sh : ) and book no longer responds to anything except holding down the power button for a long time.

I don’t mind reinstalling KFMon each time - it’s much easier than resetting the device to factory settings and re-uploading 10 GB of books. Ideally, I’d like to use both programs, but I might try another factory reset and just install KOReader without Plato this time.

[DNSB]

Please disregard Jon's post. Most of the rest of us do. You do not need to re-install NickelMenu after removing KFMon. They do not interfere with each other.

You will need to remove the kfmon file found in .adds/nm. NickelMenu will see it and try to run KFMon regardless of whether KFMon is installed.

Your Kobo was never made to run Plato. If you find issues, a better place for any discussion is the Issues section of Baskerville's Plato GitHub page.

I have Plato 0.9.44 installed on my KLC and have not seen the constant freezing you are reporting.

As far as I can tell, the latest firmware is not installed after every restart. You will either have an OTA update to the firmware which are few and far between and would only be triggered when your Kobo calls home and it's firmware revision is compared to the latest available or you manually unpack a firmware update file and place it's contents in the .kobo directory.

And constant KFMon updates? KFMon only needs to be re-installed after a firmware update or factory reset. Since both 4.38.23171 (Kobo touchscreen devices other than the Libra Colour, Clara Colour and Clara BW) and 4.41.23145 (Libra Colour, Clara Colour and Clara BW) show a RTM date of 2024-Oct-29, hardly constant updates.

So my current suggestion is to do a real factory reset, let the latest firmware download, register, etc.

Then run the OCP install script with the OCP-Plato-0.9.44_KOReader-v2024.11.zip file in the same directory as the install.ps1 script. Also download the KFMon-Uninstaller.zip from the first message in the Kute File Monitor: A smarter file-trigger based launcher After the install is finished, unpack the KoboRoot.tgz file from the KFMon uninstaller zip and copy it to the .kobo directory. Safely eject, etc.

You may also want to remove all files in the .adds/nm directory except for the doc file and copy the attached file (I added the .txt extension to allow it to be attached) into that directory.