Yesterday, 02:13 PM | #16 |
Enthusiast
Posts: 29
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
|
Yesterday, 02:18 PM | #17 |
Wizard
Posts: 2,634
Karma: 11749029
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
|
Yesterday, 06:05 PM | #18 |
Enthusiast
Posts: 29
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Maybe a stupid question. How would you install the correct fastboot driver?
Is still the one from https://www.mobileread.com/forums/sh...26&postcount=1 And than part 6. Download this Fastboot Driver. Just want to make sure I have the right one. |
Yesterday, 06:16 PM | #19 |
Wizard
Posts: 2,634
Karma: 11749029
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
Actually, all the ADB and all the fastboot are using the stock Windows WinUSB driver.
That's as generic as white sandwich bread. Since you had fastboot working, that's good enough. (And you can forget about fastbogus.exe too.) I've updated edl.exe once again. You should DL it even though there is no functional difference. Simply better error handling for scenarios that you will never use. Code:
C:\>edl /u /r /plast_parti trash Found EDL 9008, configuring... nope, configuring... ok Requesting info on LUN 0... ok Requesting GPT 0 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 1 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 2 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 3 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 4 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 5 header... ok, receiving... ok, requesting entries... ok, receiving... ok Ambiguous partition name "last_parti" needs LUN |
Today, 06:59 AM | #20 |
Enthusiast
Posts: 29
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
I have been hard at work to find a solution. No luck yet.
I have checked Code:
build.prop ro.boot.flash.locked: Set to 0. This correctly reflects that the bootloader is unlocked, aligning with the ro.boot.verifiedbootstate being orange. sys.oem_unlock_allowed: Set to 0. This seems contradictory given the bootloader status is unlocked. Normally, this would be set to 1 if the bootloader unlocking is permissible. If your intention is for the device to allow OEM unlocking, this property should be set to 1. The property ro.oem_unlock_supported, which you mentioned should be set based on the device's support for flashing unlock, is not listed in your output. If your device supports this feature, you should ensure this property is explicitly defined in your system configuration with the appropriate value (1 for support, 0 for no support). This what I got from it tnx to my second brain. Posting here just incase. I have tried a different fastboot driver the google instead xaomi I have chosen a different fastboot and bogus one no luck I really hope we can crack this togher. |
Today, 09:10 AM | #21 |
Wizard
Posts: 2,634
Karma: 11749029
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
Theoretically, none of that unlocking stuff should matter. Firehose should be OS agnostic and not know anything about that stuff.
It surprising that both the GoCo7 and Go103 with different flash types have the same problem. So to recap (please correct me): Writing a partition with EDL freezes when it tries to write. Normal bootloader fastboot has had the commands ripped out of it. (Whether this is Onyx being mean or just the migration to fastbootd, I don't know.) Recovery fastbootd accepts commands but fails on write. I've been doing some reverse engineering on this Firehose loader. It really shouldn't freeze like that even for errors. I've learned "many cheerful facts about the square of the hypotenuse". |
Today, 10:28 AM | #22 |
Wizard
Posts: 2,634
Karma: 11749029
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5
|
Here's another thing to try that might work out better.
Always do a reset and back to EDL between things that didn't work out well. Code:
edl /l<alpha or patched> edl /u /r /pmisc /c1 small.img edl /u /w /pmisc /c1 /v small.img |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Color Need help un-rooting! | banjobama | Nook Color & Nook Tablet | 4 | 03-23-2012 09:08 AM |
Rooting? | Alantra | Kobo Tablets | 6 | 01-06-2012 01:04 AM |
Color re-rooting | MusingCoyote | Nook Developer's Corner | 4 | 01-01-2012 06:18 PM |
Rooting | ectoplasm | Kindle Fire | 25 | 12-04-2011 12:26 PM |
Rooting a 1.1 ... | Cpl Punishment | Nook Developer's Corner | 45 | 02-20-2011 01:56 AM |