Bluetooth Page Turner plugin for Kobo KOReader

[trence]

FWIW,

I swapped back to the first version, and no issues. The on.sh on both of them are identical

[lumping-sugar66]

Ahh, it looks like the on.sh modifications for Libra devices are not applied. You may have overwritten them when you were upgrading to the new version. Can you refer to @enji’s comment above?

You need`rtk_hciattach` instead of `hciattach on Libra devices. Sounds like you have your previous on.sh Script as a back up, you can refer to that for the right commands.


Bluetoothctl is not responding because Bluetooth is not properly up yet.
Uhid.ko is not found because it’s not being run from the right directory.
Both of these points will be non-issues once you have the fixed on.sh in there.

Let me know how it goes!

[trence]

I'm sorry for the confusing word salad above. What I meant to say is the On.sh is line for line the same in both the working version (v1) and this newest one that gives the error (v3). This includes the change for the Libra 2.

#!/bin/bash
cd "$(dirname "$0")"

insmod /drivers/mx6sll-ntx/wifi/sdio_bt_pwr.ko
insmod ./uhid/uhid.ko
/sbin/rtk_hciattach -s 115200 ttymxc1 rtk_h5
dbus-send --system --dest=org.bluez --print-reply / org.freedesktop.DBus.ObjectManager.GetManagedObjec ts
hciconfig hci0 up

[lumping-sugar66]

Ok, I’m not sure what’s happening at this point, and the code is lacking in log generation to help. Are you ensuring you turn on WiFi manually? The new version is expecting you to turn WiFi on by yourself. Although I have implemented a basic method of checking whether it’s on or not, maybe there are differences in between devices.

Can you execute “iwconfig” on the terminal emulator when WiFi is off and show me the result? If you run iwconfig on the emulator and wifi is turned off, the message should not include the text ESSID. If it does, then the way I detect WiFi is incorrect.

If this doesn’t yield any results, I’ll provide a version of the code that produces an excess amount of logs so that we can see more clearly.

[trence]

The message it gives is:

lo no wireless extensions

[billie]

Hi, this looks really cool !

I'm trying to get it to work on my Clara BW. I got the 'No result from the Bluetooth script' error so I tried running it manually, via SSH.

Output of running on.sh:

# pwd
/mnt/onboard/.adds/koreader/plugins/bluetooth.koplugin
# ash ./on.sh
insmod: can't insert '/drivers/mx6sll-ntx/wifi/sdio_bt_pwr.ko': No such file or directory
insmod: can't insert './uhid/uhid.ko': invalid module format
Realtek Bluetooth ERROR: Can't open serial port, 2, No such file or directory
Realtek Bluetooth ERROR: Can't initialize device 2, No such file or directory
Error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Can't open HCI socket.: Address family not supported by protocol

When I check /drivers/ there's only the following:

# pwd && ls
/drivers/mt8113t-ntx/mt66xx
wlan_drv_gen4m.ko   wmt_cdev_bt.ko      wmt_chrdev_wifi.ko  wmt_drv.ko

(there's no other directories or subdirectories)

I don't know if these are equivalent, but I tried the following:

# insmod /drivers/mt8113t-ntx/mt66xx/wmt_cdev_bt.ko
insmod: can't insert '/drivers/mt8113t-ntx/mt66xx/wmt_cdev_bt.ko': File exists

and the same output for all other files listed here.
Anyways, if you could point me in the right direction (or tell me there's no easy solution) that would be greatly appreciated.. Thank you!

[Lonenso]

Hi There,

New to mobileread and koreader, I am using kobo clara bw, and I've met the same issue that evtest says the event is just a ScanCode.

And `bluetoothctl devices` hangs, so I try this `rtk_hciattach` directly and it tells
```
[root@kobo bluetooth.koplugin]# ash on.sh
insmod: can't insert '/drivers/mx6sll-ntx/wifi/sdio_bt_pwr.ko': No such file or directory
insmod: can't insert './uhid/uhid.ko': invalid module format
Realtek Bluetooth ERROR: Can't open serial port, 2, No such file or directory
Realtek Bluetooth ERROR: Can't initialize device 2, No such file or directory
Error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Can't open HCI socket.: Address family not supported by protocol
```

I also tried to watch dmesg output when kobo native bluetooth turned on and connected.
```
[ 40.837592] .(0)[998:main_thread][wlan][998]nicEventLayer0ExtMagicNIC INFO) Amsdu update event ucWlanIdx[1] ucLen[3] ucMaxMpduCount[3]
[ 42.065342] .(0)[1072:hci_thread][MTK-BT] BT_open: major 192 minor 0 (pid 1072)
[ 42.065363] .(0)[1072:hci_thread][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(0) start
[ 42.065499] .(0)[1072:hci_thread][STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1, state = 3
[ 42.101634] .(0)[1072:hci_thread][STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 36128 usec
[ 42.113669] .(0)[987:mtk_wmtd][WMT-CORE][I]opfunc_utc_time_sync:Send WMT_UTC_SYNC_CMD command OK!
[ 42.113689] .(0)[987:mtk_wmtd][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:2 f:0 g:0 w:2 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
[ 42.113765] .(0)[1072:hci_thread][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(0) ok
[ 42.113775] .(0)[1072:hci_thread][MTK-BT] BT_open: WMT turn on BT OK!
[ 42.113780] .(0)[1072:hci_thread][MTK-BT] BT_open: Now it's in MTK Bluetooth Mode
[ 42.113784] .(0)[1072:hci_thread][MTK-BT] BT_open: STP is ready!
[ 42.113790] .(0)[1072:hci_thread][BTFWLOG]bt_state_notify: g_bt_on 0, on_off 255
[ 42.727150] .(0)[102:kworker/0:2]bd71827-power bd_work_callback():soc(c=43,v=43,clamp_soc=42),vba t(stat=(32,2),v=3756800,vmin=3750200),vsys(v=37470 00,vmin=3738400),curr=-146188(avg=-113022),cc=47084698,dcap=1658,fcap=1657
[ 44.924665] .(0)[102:kworker/0:2]input: COIDEA KM as /devices/virtual/misc/uhid/0005:07D7:0000.0001/input/input3
[ 44.931675] .(0)[102:kworker/0:2]hid-generic 0005:07D7:0000.0001: input,hidraw0: BLUETOOTH HID v1.11 Mouse [COIDEA KM] on
```

summary:
0. kobo clara bw, use this plugin commit 071cb56
1. bluetoothctl devices - hang
2. /dev/input/event3 - check
3. evtest /dev/input/event3, receive EventType(Misc=4), Scan Code=4
4. main.lua, kobo clara bw section, hasKeys = yes - check
5. main.lua, event_map, add BTLeft, BTRight - check
6. open /dev/input/event3 right behind fake - check