Quote:
Originally Posted by denisuu
Maybe a loader for Qualcomm 630...
|
Did we try that:
https://github.com/bkerler/Loaders/b..._asus_peek.bin
The closest in the '90 that I see is the QCA6390 which is in the QC factory SDM662 that you tried.
Yeah, I load the all the loaders into a directory then "qcomview * /s" and it lists all the models. I then search for the string to find which loader(s) that model is in.
I can see on my hardware console that if you push and hold the power button after it does a reset it pauses the boot. If you hold it long enough it reboots to 900e. I've never found anything that you can do with that except get the serial number.
I can also see if you push the power button rapidly you can get:
Code:
KeyPress:258, BootReason:0
(vs. the normal KeyPress:0)
But it doesn't do anything.
Edit: If you hold Esc into the hardware console when it boots it will go to 9008
If you hold Backspace (^H) it will go to recovery
*** Stop the presses! I can get it into fastboot mode! ***
Reliably, no. But I've done it five times.
You'll need your UART for this.
Power reset until it starts booting, hold the backspace key down.
When it says "BootIntoMode detect begin" hold it for another 3 seconds, then release.
It should go into recovery.
Power reset until it starts booting, hold the backspace key down.
When it says "BootIntoMode detect begin" hold it for another 3 seconds, then release.
It should go into fastboot.
If it doesn't catch or reboots, just do the backspace again same as before.
Warning: Fastboot initially has a fast timeout. Do any command within 5 seconds. After that, take your time.
Code:
C:\>fastboot getvar all
(UART is 115200, 8 bit, no parody
)