Quote:
Originally Posted by ramensoup150
If you mean pressing the power button for a long time to reset the device(after each failure), I did that multiple times. And then redid everything with the other loaders I mentioned. Still didn't work
I will try the lenovo/motorola loaders
|
Are you getting that same "Could not write device" error on all loaders? I do not think trying other loaders will help with that error. The error seems to indicate the loader is not being sent.
I tried 4 different loaders before finding one that worked, and the edl --loader command worked successfully on all of them. My failure was with the edl commands after the loader.
Did you read post 37 and responses as I suggested earlier? That error seems similar to yours. Post 64 states they needed a factory reset to get past the error. A factory reset will remove your data, though. If you have not already done so, try a different USB cable first.
The lenova_motorola loader that worked for me was
lenovo_motorola/001b80e102e80000_8b2d1c830d9d8576_fhprg_moto_g52.b in from the NoteAir3C thread. It was not on GitHub.